UC01-0B16F93P10

1. Materials & Surface Treatment: See list. 2. Plating Specifications: - Contacts: Overall nickel plating minimum 50 μin, gold plating on mating area, gold plating on soldering area. - Shell: Overall nickel plating minimum 30 μin. - Middle plate: Cleaning only. 3. Mechanical Performance: - Mating force: Insertion force 0.5~2.0 kgf; withdrawal force 0.8~2.0 kgf, 0.6~2.0 kgf after durability test. - Durability: 10,000 cycles. 4. Electrical Performance: - Rated current: 5A max. - Rated voltage: 20V max. - Withstanding voltage: 100V AC. - Contact resistance: 40 mΩ max. - Insulation resistance: 100 MΩ min. 5. Environmental Performance: - Operating temperature: -40°C~+85°C. - Soldering temperature: 265±5°C, 5±0.5 sec. - Salt spray test: 48 hours min. 6. Packaging & Shipping Requirements: - Leave 10 empty positions at both the beginning and end of each reel; seal the tail end with masking tape. - After the reel is fully loaded, wind one additional layer of protective tape, seal with masking tape, and apply one material label. - Pack 10 reels per stack (3,000 pieces total) into one outer carton. - Handle with care during transport. - Do not stack excessively during transport (maximum height 1.8 m); do not apply heavy pressure. - Drop test conditions: Finished carton free-fall from a height of 1.2 m (one corner, three edges, six faces); products must not escape from the lower carrier tape pockets; no impact damage or deformation allowed; inner packaging materials must not be severely damaged.