UC01-1O16F88P10

1. Leave 10 empty pockets at both the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional protective leader tape, seal it with masking tape, and affix 1 material label. 3. Stack every 10 reels into one lot totaling 3,500 pcs and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack too high during transit (maximum 1.8 meters); do not apply heavy pressure. 6. Drop test conditions: finished goods carton dropped from a height of 1.2 meters in free fall (1 corner, 3 edges, 6 faces): a. Products must not escape from the carrier tape pockets. b. Products must show no impact damage or deformation. c. Inner packaging materials must not be severely damaged.

Key features

• Recommended PCB layout (top view), thickness 0.8mm, unspecified tolerance ±0.05mm
• Material & surface finish: see list
• Plating specifications:
• Contacts: overall nickel plating min 50μ", gold plating on mating area, gold plating on soldering area
• Shell: overall nickel plating min 30μ"
• Middle plate: clean only
• Mechanical performance:
• Insertion force: 0.5~2.0kgf
• Extraction force: 0.8~2.0kgf, 0.6~2.0kgf after durability test
• Durability: 10000 cycles
• Electrical performance:
• Rated current: 5A max
• Rated voltage: 20V max
• Withstanding voltage: 100V AC
• Contact resistance: 40mΩ max
• Insulation resistance: 100MΩ min
• Environmental performance:
• Operating temperature: -40°C~+85°C
• Soldering temperature: 265±5°C, 5±0.5s
• Salt spray test: 48 hours min