AD8134ACPZ-REEL7

The AD8134 is a triple, low cost differential or singleended input to differential output driver, and each amplifier has a fixed gain of 2 to compensate for the attenuation of the line termination resistors. The AD8134 is specifically designed for RGB signals but can be used for any type of analog signals or high speed data transmission. The AD8134 is capable of driving either Category 5 (Cat-5) unshielded twisted pair (UTP) cable or differential printed circuit board transmission lines with minimal signal degradation. A unique feature that allows the user to transmit balanced horizontal and vertical video sync signals over the three common-mode channels with minimal electromagnetic interference (EMI) radiation is included on-chip. The outputs of the AD8134 can be set to a low voltage state that allows easy differential multiplexing of multiple drivers on the same twisted pair cable, when used with external series diodes. The AD8134 driver is a natural complement to the AD8143, AD8129, and AD8130 differential receivers. Manufactured on the Analog Devices next generation XFCB bipolar process, the AD8134 has a large signal bandwidth of 225 MHz and a slew rate of 1600 V/μs. The AD8134 has an internal common-mode feedback feature that provides output gain and phase matching that is balanced to -60 dB at 50 MHz, suppressing harmonics and reducing radiated EMI. The AD8134 is available in a 24-lead LFCSP and can operate over the -40°C to +85°C extended industrial temperature range.

Applications

• Keyboard-video-mouse (KVM) networking

Key features

• Triple high speed differential driver 225 MHz, −3 dB large signal bandwidth 450 MHz, -3 dB small signal bandwidth
• Easily drives 1.4 V p-p video signal into doubly terminated 100 Ω UTP cable
• 1600 V/μs slew rate
• Fixed internal gain of 2
• Internal common-mode feedback network
• Output balance error −60 dB @ 50 MHz
• On-chip sync-on-common-mode circuitry
• Output pull-down feature for line isolation
• Differential input and output
• Differential-to-differential or single-ended-to-differential operation
• High isolation between amplifiers: 80 dB @ 10 MHz
• Low distortion: 64 dB SFDR @ 10 MHz on 5 V supply, R̅L,dm = 200 Ω̅
• Low offset: 3 mV typical output-referred on 5 V supply
• Low power: 26.5 mA for three drivers and sync circuitry
• Wide supply voltage range: +5 V to ±V
• Available in space-saving packaging: 4 mm × 4 mm LFCSP