BX-USB-701-16P

- Materials: - Housing & molding material: LCP, UL94 V-0 - Contacts: Copper alloy, thickness T = 0.20mm - Middle clip: SUS301-1/2H, thickness T = 0.15mm - Shell: SUS, thickness T = 0.30mm - Mechanical Properties: - Insertion force: 5~20Nf max - Withdrawal force: 6~20Nf min - Durability: 10,000 cycles - Electrical Properties: - Rated current: 3A max - Rated voltage: 20V max - Withstanding voltage: 100V AC - Contact resistance: 40mΩ max - Insulation resistance: 100MΩ min - Environmental Conditions: - Operating temperature: -40°C~+85°C - Soldering temperature: 265±5°C, 5±0.5s - Recommended PCB layout (thickness T: 1.0~1.2mm), unspecified tolerances ±0.05mm - Packaging Instructions: - Leave 16 empty cavities at both the beginning and end of each reel; seal the tail end with masking tape. - After filling the reel with products, wrap one additional round of protective tape, seal with masking tape, and apply 1 material label. - Stack 10 reels per set; pack 10,000 products total into 1 outer carton. - Handle with care during transport. - Do not over-stack during transit (maximum height 1.8m); do not apply heavy pressure. - Drop test conditions: finished carton free-fall from 1.2m height (one corner, three edges, six faces): - Products must not fall out of the carrier tape pockets. - Products must show no impact damage or deformation. - Inner packaging materials must not be severely damaged.