TYPEC-16P-L735

1. Leave 16 empty pockets at the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional round of leader tape, seal it with masking tape, and apply 1 material label. 3. Stack 10 reels per pile, totaling 10,000 products, and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack too high during transit (maximum 1.8 meters); do not subject to heavy pressure. 6. Drop test conditions: finished goods carton dropped in free fall from a height of 1.2 meters (1 corner, 3 edges, 6 faces): a. Products must not escape from the carrier tape pockets. b. Products must not show any impact damage or deformation. c. Inner packaging materials must not be severely damaged.

Key features

• Recommended PCB layout (thickness: 1.0~1.2mm)
• Unspecified tolerances: ±0.05mm
• Materials:
• Housing and molding: LCP, UL94 V-0
• Contacts: Copper alloy, thickness 0.20mm
• Middle clamp: SUS301-1/2H, thickness 0.15mm
• Shell: SUS, thickness 0.30mm
• Mechanical Properties:
• Insertion force: Max 5~20Nf
• Withdrawal force: Min 6~20Nf
• Durability: 000 cycles
• Electrical Properties:
• Rated current: Max 3A
• Rated voltage: Max 20V
• Withstanding voltage: 100V AC
• Contact resistance: Max 40mΩ
• Insulation resistance: Min 100MΩ
• Environmental Conditions:
• Operating temperature: -40°C~+85°C
• Soldering temperature: 265±5°C, 5±0.5 seconds