ESD122DMYR

8.4VC Clamp 2.5A@8/20us Ipp ESD DIODE X2-SON-3(0.6x1.3)

X2-SON-3(0.6x1.3)ROHS3 CompliantActive

ESD DIODE 3.6VWM 8.4VC X2-SON-3(0.6x1.3)

Manufacturer: TI
Manufacturer part #: ESD122DMYR
Store part #: C1975871
Package / case: X2-SON-3(0.6x1.3)
Category: TVS Diodes
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

14,875 in stock

#C1975871

Stock & price checked 9 days ago

Quantity	Unit price	Pack price
1+	₹62.70	₹62.70
10+	₹53.34	₹533.40
30+	₹46.81	₹1,404.30
100+	₹41.37	₹4,137.00
500+	₹39.62	₹19,810.00
1,000+	₹38.75	₹38,750.00

Quantity (min 1)

1 × ₹62.70

₹62.70

excl. GST

₹73.99 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 10,000 per reel

ESD122DMYR

₹62.70 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Clamping Voltage: 8.4V
Operating Temperature: -40℃~+125℃
Peak Pulse Current (Ipp): 2.5A@8/20us
Peak Pulse Power Dissipation (Ppp): 20W@8/20us
Number of Channels: 2
Voltage - Breakdown: 7.9V
type: ESD
Reverse Leakage Current (Ir): 10nA
Polarity: Bidirectional
Reverse Stand-Off Voltage (Vrwm): 3.6V

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 10,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.007 g

Overview

ESD122 is a bidirectional TVS ESD protection diode array designed for USB Type-C and HDMI 2.0 circuit protection. The ESD122 is rated to dissipate contact ESD strikes up to the highest level specified by the IEC 61000-4-2 international standard (17kV contact discharge, 17kV air-gap discharge). This device features low IO capacitance per channel and pin to support symmetric differential high-speed signal routing, making it an ideal choice for protecting high-speed interfaces up to 10Gbps, such as USB 3.1 Gen 2 and HDMI 2.0. Low dynamic resistance and low clamping voltage ensure system-level protection against transient events. In addition, the ESD122 is an ideal ESD solution for USB Type-C Tx/Rx lines. Since the USB Type-C connector has two layers, using a 4-channel ESD device requires vias that degrade signal integrity. Using four ESD122 (2-channel) devices minimizes the number of vias and simplifies board layout. The ESD122 is available in two easy through-wiring packages.

Applications

End equipment
Mobile phones and tablets
Portable computers and desktops
Set-top boxes
TVs and monitors
Servers
Interfaces
USB Type-C
HDMI 2.0/1.4
USB 3.1 Gen 2/Gen 1, USB 3.0, and USB 2.0
Thunderbolt-1 and Thunderbolt-2
DisplayPort 1.3
PCI Express 3.0 bus interface
Serial ATA (SATA)

Key features

IEC 61000-4-2 Level 4 ESD protection
±17kV contact discharge
±17kV air-gap discharge
Withstands over 10,000 ESD strikes without any performance degradation, compliant with IEC 61000-4-2 Level 4 (contact)
IEC 61000-4-4 EFT protection
80A (5/50ns)
IEC 61000-4-5 surge protection
2.5A (8/20μs)
Low IO capacitance
0.1pF (typical) between IOs
0.2pF (typical) from IO to ground
DC breakdown voltage: 5.1V (min)
Ultra-low leakage current: 10nA (max)
Low ESD clamping voltage: 8.4V at 5A TLP
Supports high-speed interfaces over 10Gbps
Industrial temperature range: -40°C to +125°C
Type-C friendly dual-channel through-wiring package
Pins suitable for symmetric differential high-speed signal routing
Two different package options
0402 package, 0.6mm×1mm, 0.34mm pitch
0502 package, 0.6mm×1.32mm, 0.5mm pitch