LM158AWG/883

20mA 2 4mV 100nA 70dB 1MHz 500uA Rail-to-Rail Input, Rail-to-Rail Output CFP(NAC)-10 Instrumentation, Op Amps, Buffer Amps RoHS

CFP(NAC)-10ROHS CompliantActive

LM158QML Low-Power Dual Operational Amplifier

Manufacturer: TI
Manufacturer part #: LM158AWG/883
Store part #: C5214438
Package / case: CFP(NAC)-10
Category: Instrumentation, Op Amps, Buffer Amps
Packaging: Tray

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

5 in stock

#C5214438

Stock & price checked 4 days ago

Quantity	Unit price	Pack price
1+	₹9,342.95	₹9,342.95
30+	₹8,978.00	₹2,69,340.00

Quantity (min 1)

1 × ₹9,342.95

₹9,342.95

excl. GST

₹11,024.68 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 54 per tray

LM158AWG/883

₹9,342.95 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Output Current: 20mA
Number of Channels: 2
Vos - Input Offset Voltage: 4mV
Input Offset Current(Ios): 30nA
Operating Temperature: -55℃~+125℃
Ib - Input Bias Current: 100nA
Common Mode Rejection Ratio(CMRR): 70dB
Gain Bandwidth Product: 1MHz
Quiescent Current: 500uA
Features: Built-in compensation
Dual Supply: -16V~-1.5V;1.5V~16V
Rail to Rail: Rail-to-Rail Input, Rail-to-Rail Output
Single Supply: 3V~32V

Packaging & compliance

RoHS: ROHS Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tray
Standard pack: 54 / Tray
Sold per: Piece
Minimum order: 1
Unit weight: 0.2 g

Overview

The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies.

Applications

transducer amplifiers
dc gain blocks
all the conventional op amp circuits in single power supply systems

Key features

Available with Radiation Specification – High Dose Rate 100 krad(Si)
ELDRS Free 100 krad(Si)
Internally Frequency Compensated for Unity Gain
Large DC Voltage Gain: 100 dB
Wide Bandwidth (Unity Gain): 1 MHz(Temperature Compensated)
Wide Power Supply Range:
Single Supply: 3V to 32V
Or Dual Supplies: ±1.5V to ±16V
Very Low Supply Current Drain (500 μA) − Essentially Independent of Supply Voltage
Low Input Offset Voltage: 2 mV
Input Common-mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply Voltage
Large Output Voltage Swing: 0V to V⁺ - 1.5V
In the Linear Mode the Input Common-Mode Voltage Range Includes Ground and the Output Voltage can also Swing to Ground, even though Operated from only a Single Power Supply Voltage.
The Unity Gain Cross Frequency is Temperature Compensated.
The Input Bias Current is also Temperature Compensated.
Two Internally Compensated Op Amps
Eliminates Need for Dual Supplies
Allows Direct Sensing Near Gnd and V₀ also Goes to Gnd
Compatible with all Forms of Logic
Power Drain Suitable for Battery Operation