LM26001QMXAX/NOPB

The LM26001 is a switching regulator designed for the high - efficiency requirements of applications with standby modes. The device features a low - current sleep mode to maintain efficiency under light - load conditions and current - mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10 μA typically in shutdown mode and less than 40 μA in sleep mode. Forced PWM mode is also available to disable sleep mode. The LM26001 can deliver up to 1.5 A of continuous load current with a fixed current limit, through the internal N - channel switch. The part has a wide input voltage range of 4.0 V to 38 V and can operate with input voltages as low as 3 V during line transients. Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock. Other features include Power Good, adjustable softstart, enable pin, input undervoltage protection, and an internal bootstrap diode for reduced component count.

Applications

• Automotive Telematics
• Navigation Systems
• In - Dash Instrumentation
• Battery - Powered Applications
• Standby Power for Home Gateways/Set - top Boxes

Key features

• LM26001 - Q1 is an Automotive - Grade Product that is AEC - Q100 Grade 1 Qualified (-40 ℃ to +125 ℃ Operating Junction Temperature)
• High - Efficiency Sleep Mode 40 μA Typical Iq in Sleep Mode 10 μA Typical Iq in Shutdown Mode
• 3.0 - V Minimum Input Voltage
• 4.0 - V to 38 - V Continuous Input Range 1.5% Reference Accuracy
• Cycle - by - Cycle Current Limit
• Adjustable Frequency (150 kHz to 500 kHz)
• Synchronizable to an External Clock
• Power Good Flag
• Forced PWM Function
• Adjustable Soft - Start
• HTSSOP - 16 Exposed Pad Package
• Thermal Shut Down