LM2623QNHLRQ1

LM2623-Q1 is a high-efficiency, general-purpose boost DC/DC switching regulator for automotive systems. The device accepts input voltages between 0.9V and 14V and converts them to a regulated output voltage of 1.24V to 14V. To accommodate a wide range of applications, the LM2623-Q1 allows designers to program the output voltage, operating frequency (300kHz to 2MHz), and duty cycle (17% to 90%) to optimize performance. The selected values can be fixed or varied with the input voltage or input/output voltage ratio. The LM2623-Q1 achieves good efficiency and stable operation over a wide operating range using a very simple on/off regulation mode. The device typically regulates voltage via pulse skipping (pulse frequency modulation (PFM)).

Applications

• Automotive camera
• Automotive radar
• Automotive GPS
• Flash memory programming
• White LED driver

Key features

• 32-channel AFE for automotive applications compliant with AEC-Q100
• Device temperature grade 1: ambient operating temperature range -40°C to 125°C
• Device HBM ESD classification level 2
• Device CDM ESD classification level C4A
• High efficiency across a very wide load range
• Very low output voltage ripple
• Switching frequency up to 2MHz
• 0.9V to 14V operating voltage range
• 1.1V startup voltage
• 1.24V to 14V adjustable output voltage
• 0.17Ω internal MOSFET
• Regulator efficiency up to 90%
• Typical operating current of 80μA (VDD pin input to power supply)
• Low shutdown current (<2.5μA)
• 4mm×4mm thermally enhanced WSON package option