LM2902KAVQDRQ1

This device contains four independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide voltage range. Dual-supply operation is also possible if the voltage difference between the two supplies is between 3V and 36V (B-version devices), between 3V and 32V (V-version devices), or between 3V and 26V (all other devices), and VCC is at least 1.5V above the positive input common-mode voltage. The low supply-current drain is independent of the supply voltage magnitude. Application areas include transducer amplifiers, DC gain blocks, and all conventional op amp circuits, which can now be easily implemented in single-supply voltage systems. For example, the LM2902 can operate directly from the standard 5V supply voltage used in digital systems, and can readily provide the required interface electronics without the need for an additional ±15V supply.

Applications

• Automotive lighting
• Body electronics
• Automotive head unit
• Telematics control unit
• Emergency call (eCall)
• Passive safety: braking systems
• EV/HEV: inverter and motor control
• On-board charger (OBC) and wireless charger
• Battery management system (BMS)

Key features

• AEC Q-100 qualified for automotive applications
• Temperature Grade 1: -40°C to +125°C
• Device HBM ESD Classification Level 2
• Device CDM ESD Classification Level C5
• Wide supply voltage range:
• 3V to 36V (LM2902B-Q1 and LM2902BA-Q1)
• 3V to 32V (LM2902KV and LM2902KAV)
• 3V to 26V (all other variants)
• Maximum input offset voltage at 25°C:
• 2mV (LM2902BA-Q1 and LM2902KAV)
• 3mV (LM2902B-Q1)
• 7mV (all other variants)
• Internal RF and EMI filter (LM2902B-Q1 and LM2902BA-Q1)
• Unity gain bandwidth of 1.2MHz
• Common-mode input voltage range includes V–