LMP7717MFX/NOPB

The LMP7717 (single) and the LMP7718 (dual) low noise, CMOS input operational amplifiers offer a low input voltage noise density of 5.8 nV/√Hz while consuming only 1.15 mA (LMP7717) of quiescent current. The LMP7717/LMP7718 are stable at a gain of 10 and have a gain bandwidth (GBW) product of 88 MHz. The LMP7717/LMP7718 have a supply voltage range of 1.8V to 5.5V and can operate from a single supply. The LMP7717/LMP7718 each feature a rail-to-rail output stage. Both amplifiers are part of the LMP precision amplifier family and are ideal for a variety of instrumentation applications. The LMP7717 family provides optimal performance in low voltage and low noise systems. A CMOS input stage, with typical input bias currents in the range of a few femto-Amperes, and an input common mode voltage range, which includes ground, make the LMP7717/LMP7718 ideal for low power sensor applications where high speeds are needed. The LMP7717/LMP7718 are manufactured using TI’s advanced VIP50 process. The LMP7717 is offered in either a 5-Pin SOT-23 or an 8-Pin SOIC package. The LMP7718 is offered in either the 8-Pin SOIC or the 8-Pin VSSOP.

Applications

• ADC Interface
• Photodiode Amplifiers
• Active Filters and Buffers
• Low Noise Signal Processing
• Medical Instrumentation
• Sensor Interface Applications

Key features

• Input Offset Voltage: ±150 μV (max)
• Input Referred Voltage Noise: 5.8 nV/√Hz
• Input Bias Current: 100 fA
• Gain Bandwidth Product: 88 MHz
• Supply Voltage Range: 1.8V to 5.5V
• Supply Current Per Channel LMP7717: 1.15 mA
• Supply Current Per Channel LMP7718: 1.30 mA
• Rail-to-Rail Output Swing @ 10 kΩ Load: 25 mV from Rail
• Rail-to-Rail Output Swing @ 2 kΩ Load: 45 mV from Rail
• Ensured 2.5V and 5.0V Performance
• Total Harmonic Distortion: 0.04% @ 1kHz, 600Ω
• Temperature Range: -40°C to 125°C