ADI

LT1078IS8#PBF

5mA 2 60uV 0.07V/us 108dB 6nA 200kHz 39uA SOIC-8 Instrumentation, Op Amps, Buffer Amps RoHS

SOIC-8ROHS3 CompliantActive

Micropower, Dual and Quad, Single Supply, Precision Op Amps

Manufacturer: ADI
Manufacturer part #: LT1078IS8#PBF
Store part #: C579636
Package / case: SOIC-8
Category: Instrumentation, Op Amps, Buffer Amps
Packaging: Tube-packed

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

26 in stock

#C579636

Stock & price checked 8 days ago

Quantity	Unit price	Pack price
1+	₹1,975.19	₹1,975.19
10+	₹1,882.46	₹18,824.60
30+	₹1,721.69	₹51,650.70
100+	₹1,581.28	₹1,58,128.00

Quantity (min 1)

1 × ₹1,975.19

₹1,975.19

excl. GST

₹2,330.72 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 100 per tube

LT1078IS8#PBF

₹1,975.19 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Output Current: 5mA
Number of Channels: 2
Vos - Input Offset Voltage: 60uV
Slew Rate: 0.07V/us
Input Offset Current(Ios): 50pA
Operating Temperature: -40℃~+85℃
Common Mode Rejection Ratio(CMRR): 108dB
Ib - Input Bias Current: 6nA
Input Offset Voltage Drift(Vos TC): 500nV/℃
Gain Bandwidth Product: 200kHz
Quiescent Current: 39uA
Features: Reverse-phase input protection
Input Voltage Noise Density: 28nV/√Hz@1kHz
Single Supply: 2.3V~22V

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tube-packed
Standard pack: 100 / Tube
Sold per: Piece
Minimum order: 1
Unit weight: 0.919 g

Overview

The LT1078 is a micropower dual op amp in 8-pin packages including the small outline surface mount package. The LT1079 is a micropower quad op amp offered in the standard 14-pin packages. Both devices are optimized for single supply operation at 5V. ±15V specifications are also provided. Micropower performance of competing devices is achieved at the expense of seriously degrading precision, noise, speed and output drive specifications. The design effort of the LT1078/LT1079 was concentrated on reducing supply current without sacrificing other parameters. The offset voltage achieved is the lowest on any dual or quad nonchopper stabilized op amp—micropower or otherwise. Offset current, voltage and current noise, slew rate and gain bandwidth product are all two to ten times better than on previous micropower op amps. The 1/f corner of the voltage noise spectrum is at 0.7Hz, at least three times lower than on any monolithic op amp. This results in low frequency (0.1Hz to 10Hz) noise performance which can only be found on devices with an order of magnitude higher supply current. Both the LT1078 and LT1079 can be operated from a single supply (as low as one lithium cell or two Ni-Cad batteries). The input range goes below ground. The allNPN output stage swings to within a few millivolts of ground while sinking current—no power consuming pull down resistors are needed.