LTC1152CS8#PBF

The LTC1152 is a high performance, low power zero-drift op amp featuring an input stage that common modes to both power supply rails and an output stage that provides rail-to-rail swing, even into heavy loads. The wide input common-mode range is achieved with a high frequency on-board charge pump. This technique eliminates the crossover distortion and limited CMRR imposed by competing technologies. The LTC1152 is a C-LoadTM of amp, enabling it to drive any capacitive load. The LTC1152 shares the excellent DC performance specs of LTC's other zero-drift amplifiers. Typical offset voltage is 1μV and typical offset drift is 10nV / °C CMRR and PSRR are 130dB and 120dB and open-loop gain is 130dB. Input noise voltage is 2μVP - P from 0.1Hz to 10Hz. Gain-bandwidth product is 0.7MHz and slew rate is 0.5V / μs, all with supply current of 3.0mA max over temperature. The LTC1152 also includes a shutdown feature which drops supply current to 1μA and puts the output stage in a high impedance state. The LTC1152 is available in 8-pin PDIP and 8-pin SO packages and uses the standard op amp pinout, allowing it to be a plug-in replacement for many standard op amps.

Applications

• Rail-to-Rail Amplifiers and Buffers
• High Resolution Data Acquisition Systems
• Supply Current Sensing in Either Rail
• Low Supply Voltage Transducer Amplifiers
• High Accuracy Instrumentation
• Single Negative Supply Operation

Key features

• Input Common-Mode Range Includes Both Rails
• Output Swings Rail to Rail
• Output Will Drive 1kΩ Load
• No External Components Required
• Input Offset Voltage: 10µV Max
• Input Offset Drift: 100nV/°C Max
• Minimum CMRR: 115dB
• Supply Current: 3.0mA Max
• Shutdown Pin Drops Supply Current to 5µA Max
• Output Configurable to Drive Any Capacitive Load
• Operates from 2.7V to 14V Total Supply Voltage