LTC3307BHV#TRMPBF

The LTC3307B is a very small, high efficiency, low noise, monolithic synchronous 3A step-down DC/DC converter operating from a 2.25V to 5.5V input supply. Using constant-frequency, peak current mode control at switching frequencies 3MHz to 10MHz and minimum on-time as low as 22ns, this regulator achieves fast transient response with small external components. Silent Switcher architecture minimizes EMI emissions. The LTC3307B operates in forced continuous or pulse-skipping mode for low noise, or low ripple Burst Mode operation for high efficiency at light loads, ideal for battery-powered systems. The IC regulates output voltages as low as 500mV. Other features include output over-voltage protection, short-circuit protection, thermal shutdown, clock synchronization, and up to 100% duty-cycle operation for low dropout. The device is available in a low profile 12-lead 2mm × 2mm × 0.74mm LQFN package with exposed pad for low thermal resistance.

Applications

• Optical Networking
• Servers
• Telecom
• Automotive
• Industrial
• Communications
• Distributed DC Power Systems (POL)
• FPGA
• ASIC
• µP Core Supplies

Key features

• Pin Compatible with LTC3308(4A) and LTC3309(6A)
• High Efficiency: 8mΩ NMOS, 31mΩ PMOS
• Programmable Frequency 3MHz to 10MHz
• Tiny Inductor and Capacitors
• Peak Current Mode Control
• 22ns Minimum On-Time Wide Bandwidth, Fast Transient Response
• Silent Switcher Architecture Ultralow EMI Emissions
• Low Ripple Burst Mode Operation with I₀ of 40µA
• Safely Tolerates Inductor Saturation in Overload
• V₁ₙ Range: 2.25V to 5.5V
• Vₒᵤₜ Range: 0.5V to V₁ₙ
• Vₒᵤₜ Accuracy: ±1% Over Temperature Range
• Precision 400mV Enable Threshold, 1µA in Shutdown
• Power Good, Internal Compensation and Soft-Start
• Thermally Enhanced 2mm × 2mm LQFN Package
• AEC-Q100 Qualified for Automotive Applications