MAX13442EASA+

The MAX13442E/MAX13444E are fault-protected RS-485 and J1708 transceivers that feature ±80V protection from signal faults on communication bus lines. The MAX13442E/MAX13444E feature a reduced slew-rate driver that minimizes EMI and reflections, allowing errorfree transmission up to 250kbps. The MAX13443E driver can transmit up to 10Mbps. The high-speed MAX13443E RS-485 transceiver features ±60V protection from signal faults on communication bus lines. These transceivers feature foldback current limit. Each device contains one differential line driver with three-state output and one differential line receiver with three-state input. The 1/4-unitload receiver input impedance allows up to 128 transceivers on a single bus. The devices operate from a 5V supply. True fail-safe inputs guarantee a logic-high receiver output when the receiver inputs are open, shorted, or connected to an idle data line. Hot-swap circuitry eliminates false transitions on the data bus during circuit initialization or connection to a live backplane. Short-circuit current-limiting and thermal-shutdown circuitry protect the driver against excessive power dissipation, and on-chip ±15kV ESD protection eliminates costly external protection devices. The MAX13442E/MAX13443E/MAX13444E are available in an 8-pin SO package and are specified over the automotive temperature range.

Applications

• RS-422/RS-485
• Telecommunications
• Communications Systems
• Truck and Trailer Applications
• Automotive Applications
• HVAC Controls
• Industrial Networks

Key features

• ±15kV ESD Protection
• ±80V Fault Protection (±60V MAX13443E)
• Guaranteed 10mbps Data Rate (MAX13443E)
• Hot-Swappable for Telecom Applications
• True Fail-Safe Receiver Inputs
• Enhanced Slew-Rate-Limiting Facilitates Error-Free Data Transmission (MAX13442E/MAX13444E)
• Allow Up to 128 Transceivers on the Bus
• -7V to +12V Common-Mode Input Range
• ±6mA FoldBack Current Limit
• Industry-Standard Pinout