MAX16425AGCJ+

The MAX16425/MAX16425A are fully-integrated, highly efficient step-down DC-DC switching regulators. These devices operate from 4.5V to 16V input supplies, and the output can be adjusted from 0.6V to 3.3V, delivering up to 25A of load current. These single-chip regulators provide a compact high-efficiency, power-delivery solution for precision outputs that demand fast transient response. The two devices have different programmability options to enable a wide range of configurations. The programmable features include: internal/external reference voltage, output voltage set-point, switching frequency, overcurrent protection level (OCP), and soft-start timing. Discontinuous current mode (DCM) operation can be enabled through pin-strapping to improve light-load efficiency. The MAX16425/MAX16425A include multiple protection and measurement features. Positive and negative cycleby-cycle OCP, short-circuit protection, and overtemperature protection (OTP) ensure robust design. Input undervoltage and overvoltage lockout shut down the regulator to prevent damage when the input voltage is out of specification. Regulation is halted in case of an output overvoltage (OVP) event. A status pin indicates that the output voltage is within range and the output voltage is in regulation. The device has an analog output that can be configured to report output current or junction temperature with ±5% and ±8°C accuracy, respectively. The devices are available in a 27-bump (2.2mm×3.8mm) WLCSP package that provides low thermal resistance and minimizes the PCB area.

Applications

• Servers/μServers
• I/O and Chipset Supplies
• GPU Core Supply
• DDR Memory: VDDQ, VPP, and VTT
• Point-of-Load (PoL) Applications

Key features

• High-Efficiency Solution with External Bias Supply
• Up to 97% Peak
• Up to 87% Full-Load
• Up to 96% Light-Load Efficiency at 1A with DCM Enabled
• Wide Operating Range
• 4.5V to 16V Input Voltage Range
• 0.6V to 3.3V Output Voltage Range
• 25A (max) Load Current
• Flexible Design Allows Early PCB Definition
• Footprint Compatible with MAX16491 (9A), VT2491 (15A), and VT2492 (25A)
• Programmable Switching Frequency up to 1MHz
• Programmable Soft-Start and STAT Delay Timings
• Programmable Reference Voltage with External Input Option
• Programmable Positive and Negative OCP Limit
• Advanced Architecture, Protection, and Reporting Guarantees Reliable Designs
• Analog Current or Temperature Reporting
• Differential Remote Sense with Open-Circuit Detection
• Fast Transient Response with Quick-PWM™ Architecture
• Integrated Boost Switch
• 27-Bump WLCSP (2.2mm×3.8mm) Footprint
• Operation Using Ceramic Input and Output Capacitors