OPA548T-1

The OPA548 device is a low-cost, high-voltage and high-current operational amplifier that's ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high-output voltage and current. The OPA548 device operates from either single or dual supplies for design flexibility. In single-supply operation, the input common-mode range extends below ground. The OPA548 device is internally protected against over-temperature conditions and current overloads. In addition, the OPA548 device was designed to provide an accurate, user-selected current limit. Unlike other designs, which use a power resistor in series with the output current path, the OPA548 device senses the load indirectly. This allows the current limit to be adjusted from 0 A to 5 A with a resistor and potentiometer or controlled digitally with a voltage-out or current-out DAC. The Enable/Status (E/S) pin provides two functions. An input on the pin not only disables the output stage to effectively disconnect the load, but also reduces the quiescent current to conserve power. The E/S pin output can be monitored to determine if the OPA548 is in thermal shutdown. The OPA548 device is available in an industry-standard 7-lead staggered and straight lead TO-220 package, and a 7-lead DDPAK surface-mount plastic power package. The copper tab allows easy mounting to a heat sink or circuit board for excellent thermal performance. The device is specified for operation over the extended industrial temperature range, -40°C to 85°C. A SPICE macromodel is available for design analysis.

Applications

• Valve, Actuator Drivers
• SYNCHRO, SERVO Drivers
• Power Supplies
• Test Equipment
• Transducer Excitation
• Audio Amplifiers

Key features

• Wide Supply Range – Single Supply: 8 V to 60 V; Dual Supply: ±4 V to ±30 V
• High-Output Current: 3-A Continuous, 5-A Peak
• Wide Output Voltage Swing
• Fully Protected: Thermal Shutdown, Adjustable Current Limit, Output Disable Control
• Thermal Shutdown Indicator
• High Slew Rate: 10 V
• Low Quiescent Current
• Packages: 7-Lead TO-220, Zip and Straight Leads; 7-Lead DDPAK Surface-Mount