SMA6J58A

The SMA6J series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Applications

• TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Key features

• Small DO-214AC SMT footprint for minimal board space requirement
• Typical failure mode is a short circuit condition for current events exceeding component rating
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• ESD protection of data lines in accordance with IEC 61000-4-2
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Typical IR < 1μA when VBR min > 12V
• High temperature reflow soldering guaranteed: 260°C/30sec
• UL Recognized compound meeting flammability rating V-0
• Meet MSL level1, per J-STD-020, lead-frame maximun peak of 260°C
• Matte tin lead–free plated
• Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01)