TC1044SEOA713

The TC1044S is a pin-compatible upgrade to the Industry standard TC7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding -1.5V to –12V output using only two low cost capacitors, eliminating inductors and their associated cost, size and EMI. Added features include an extended supply range to 12V, and a frequency boost pin for higher operating frequency, allowing the use of smaller external capacitors. The on-board oscillator operates at a nominal frequency of 10kHz. Frequency is increased to 45kHz when pin 1 is connected to V+. Operation below 10kHz (for lower supply current applications) is possible by connecting an external capacitor from OSC to ground (with pin 1 open). The TC1044S is available in both 8-pin DIP and 8-pin small outline (SOIC) packages in commercial and extended temperature ranges.

Key features

• Converts +5V Logic Supply to ±5V System
• Wide Input Voltage Range: 1.5V to 12V
• Efficient Voltage Conversion: 99.9%
• Excellent Power Efficiency: 98%
• Low Power Consumption: 80μA @ VIN = 5V
• Low Cost and Easy to Use
• Only Two External Capacitors Required
• RS-232 Negative Power Supply
• Available in 8-Pin Small Outline (SOIC) and 8-Pin Plastic DIP Packages
• Improved ESD Protection: Up to 10kV
• No External Diode Required for High Voltage Operation
• Frequency Boost Raises FOSC to 45kHz