TS30042-M050QFNR

The TS30041 (1A) and TS30042 (2A) are DC/DC synchronous switching regulators with fully integrated power switches, internal compensation, and full fault protection. The switching frequency of 1MHz enables the use of small filter components resulting in minimal board space and reduced BOM costs. The TS30041/42 utilizes current mode feedback in normal regulation PWM mode. When the regulator is placed in standby (EN is low), the device draws less than 10uA quiescent current. The TS30041/42 integrates a wide range of protection circuitry including input supply under-voltage lockout, output voltage soft start, current limit, and thermal shutdown. The TS30041/42 includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.

Applications

• On-card switching regulators
• Set-top box, DVD, LCD, LED supply
• Industrial power supplies

Key features

• Fixed output voltage choices: 1.5V, 1.8V, 2.5V, 3.3V, and 5V with +/-2% output tolerance
• Adjustable version output voltage range: 0.9V to (VCC - 1V) with +/-1.5% reference
• Wide input voltage range: 4.5V to 40V (42V Abs Max)
• 1MHz +/-10% fixed switching frequency
• Continuous output current: 1A (TS30041), 2A (TS30042)
• High efficiency up to 95%
• Current mode PWM control with PFM mode for improved light load efficiency
• Voltage supervisor for VOUT reported at the Power Good (PG) pin
• Input supply under voltage lockout
• Soft start for controlled startup with no overshoot
• Full protection for over-current, over-temperature, and VOUT over-voltage
• SYNC function on EN/SYNC pin to control switching frequency
• Less than 10uA in standby mode
• Low external component count