AD5322BRMZ-REEL7

The AD5302/AD5312/AD5322 are dual 8-, 10-, and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V. Their on-chip output amplifiers allow the outputs to swing railto-rail with a slew rate of 0.7 V/μs. The AD5302/AD5312/AD5322 utilize a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The references for the two DACs are derived from two reference pins (one per DAC). The reference inputs can be configured as buffered or unbuffered inputs. The outputs of both DACs can be updated simultaneously using the asynchronous LDAC input. The parts incorporate a power-on reset circuit, which ensures that the DAC outputs power-up to 0V and remain there until a valid write takes place to the device. The parts contain a powerdown feature that reduces the current consumption of the devices to 200 nA at 5 V (50 nA at 3 V) and provides softwareselectable output loads while in power-down mode. The low power consumption of these parts in normal operation makes them ideally suited for portable battery-operated equipment. The power consumption is 1.5 mW at 5 V, 0.7 mW at 3 V, reducing to 1 μW in power-down mode.

Applications

• Portable battery-powered instruments
• Digital gain and offset adjustment
• Programmable voltage and current sources
• Programmable attenuators

Key features

• AD5302: Two 8-bit buffered DACs in 1 package A version: ±η LSB INL, B version: ±0.5 LSB INL
• AD5312: Two 10-bit buffered DACs in 1 package A version: ±4 LSB INL, B version: ±z LSB INL
• AD5322: Two 12-bit buffered DACs in 1 package A version: ±16 LSB INL, B version: ±8 LSB INL
• 10-lead MSOP
• Micropower operation: 300 μA @ 5 V (including reference current)
• Power-down to 200 nA @ 5 V, 50 nA @ 3 V
• 2.5 V to 5.5 V power supply
• Double-buffered input logic
• Guaranteed monotonic by design over all codes
• Buffered/Unbuffered reference input options
• 0 V to VREF output voltage
• Power-on-reset to 0 V
• Simultaneous update of DAC outputs via LDAC
• Low power serial interface with Schmitt-triggered inputs
• On-chip rail-to-rail output buffer amplifiers
• Qualified for automotive applications