ADG1636BRUZ

The ADG1636 is a monolithic CMOS device containing two independently selectable single-pole/double-throw (SPDT) switches. An EN input is used to enable or disable the device. When disabled, all channels are switched off. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. Both switches exhibit break-before-make switching action for use in multiplexer applications. The ultralow on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. The CMOS construction ensures ultralow power dissipation, making the devices ideally suited for portable and battery-powered instruments.

Applications

• Communication systems
• Medical systems
• Audio signal routing
• Video signal routing
• Automatic test equipment
• Data acquisition systems
• Battery-powered systems
• Sample-and-hold systems
• Relay replacements

Key features

• 1 Ω typical on resistance
• 0.2 Ω on resistance flatness
• ±3.3 V to ±8 V dual supply operation
• 3.3 V to 16 V single supply operation
• 1 supply required
• 3 V logic-compatible inputs
• Rail-to-rail operation
• Continuous current per channel LFCSP: 385 mA TSSOP: 238 mA
• 16-lead TSSOP and 16-lead, 4 mm×4 mm LFCSP
• 1.6 Ω maximum on resistance over temperature
• Minimum distortion: THD+N = 0.007%
• 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V
• No VL logic power supply required
• Ultralow power dissipation: < 16 nW