AP22916CCA4-7

The AP22916 is a small, low leakage, single P-channel power MOSFET designed for low-power consumption and load-switching applications. This power MOSFET has a typical RDS(ON) of 60mΩ at 5V, allowing increased load current handling capacity with a low forward voltage drop. Multiple voltages correspond to different time options to support various system load conditions. The trigger of the load switch ON pin can be controlled to be enabled or disabled by an external low voltage digital signal for sequence control application. The smart, pull down feature is built into the ON pin. Once the enable voltage is higher than VH, it will disconnect to avoid power loss. VIN and VOUT are isolated during OFF state with the TRCB (true reverse current blocking) feature. The AP22916 load switch is designed to operate from 1.3V to 5.5V, making it ideal for 1.3V, 1.8V, 2.5V, 3.6V, and 5V systems. The typical quiescent supply current is only 0.5μA. The AP22916 is available in the wafer-level chip-scale 4-pin, U-WLB0808-4 (Type B) 0.78mm×0.78mm×0.455mm, 0.4mm pitch package. The device is characterized for operation over a temperature range of -40°C to +85°C.

Applications

• Mobile devices and smart phones
• Portable media devices
• Wearable devices
• Advanced notebooks, UMPC, and MID
• Portable medical devices
• GPS and navigation equipment

Key features

• Wide Input Voltage Range: 1.3V to 5.5V
• Low On-Resistance
• 280mΩ Typical @1.3V
• 135mΩ Typical @1.8V
• 65mΩ Typical @3.6V
• 54mΩ Typical @5.0V
• Continuous Current Capability up to 2A
• True Reverse Current Blocking (TRCB)
• Discharging Resistor on VOUT When Disabled
• Ultra-Low Quiescent Current 0.5μA
• Active-High Control Pin
• Minimum 1.0V VH of ON
• ESD Protection:
• Human Body Model: 2kV
• Charged Device Model: 1kV