DAC61408RHAR

12us 1.7V~5.5V 1LSB SPI VQFN-40-EP(6x6) Digital to Analog Converters (DAC) RoHS

VQFN-40-EP(6x6)ROHS3 CompliantActive

8-channel high-voltage output DAC with internal reference voltage

Manufacturer: TI
Manufacturer part #: DAC61408RHAR
Store part #: C2862561
Package / case: VQFN-40-EP(6x6)
Category: Digital to Analog Converters (DAC)
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

4 in stock

#C2862561

Stock & price checked 13 days ago

Quantity	Unit price	Pack price
1+	₹5,632.24	₹5,632.24
30+	₹5,378.51	₹1,61,355.30

Quantity (min 1)

1 × ₹5,632.24

₹5,632.24

excl. GST

₹6,646.04 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 2,500 per reel

DAC61408RHAR

₹5,632.24 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Settling Time: 12us
Quiescent Current (Iq): 500uA
Operating Temperature: -40℃~+125℃
Voltage - Supply: 1.7V~5.5V
Function: Bipolar output;Built-in reference source;Integrated buffer;Differential output;Built-in temperature sensor;Over temperature protection;Soft reset;Power-down mode;Power-on reset
Integral non - linearity: 1LSB
Number of Channels: 8
Resolution (Bits): 12;-
Interface Type: SPI

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 2,500 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.435 g

Overview

The DAC81408, DAC71408, and DAC61408 (DACx1408) are an 8-channel buffered high-voltage output digital-to-analog converter (DAC) product series with pin compatibility and 16/14/12-bit resolution. The DACx1408 includes a low-drift 2.5V internal voltage reference, eliminating the need for an external precision reference in most applications. These devices are monotonic and offer high linearity of ±1 LSB INL. Users can choose the output configuration, including full-scale bipolar output voltages of ±20V, ±10V, ±5V, or ±2.5V and full-scale unipolar output voltages of 40V, 20V, 10V, or 5V. Moreover, the full-scale output voltage of each DAC channel can be individually programmed and controlled. The integrated DAC output buffer can sink or source up to 25mA, reducing the need for additional operational amplifiers. Each channel pair can be configured to provide a differentially output with offset calibration. Up to three frequencies of dither signals can be generated through three dedicated A - B switching pins. The DACx1408 includes a power-on reset circuit that connects the DAC outputs to ground when power is applied. The outputs will remain in this state until the device registers are properly configured for operation. Communication with the DACx1408 is via a 4-wire serial interface that supports an operating voltage of 1.7V to 5.5V.

Applications

Fiber optic networks: Mach-Zehnder modulator bias control
Industrial automation
Test and measurement

Key features

Monotonic at 16-bit resolution
INL: ±1 LSB (max) at 16-bit resolution
TUE: ±0.1% FSR (max)
Integrated 2.5V precision internal reference — initial accuracy: ±2.5mV (max); low tempco: 5ppm/°C (typ)
Flexible output configuration
Output ranges: ±2.5V, ±5V, ±10V, ±20V, 0 to 5V, 0 to 10V, 0 to 20V, 0 to 40V differential output mode
High drive capability: ±25mA (1.5V swing from supply rails)
Three dedicated A-B toggle pins for dither signal generation
Analog temperature output sensor gain: -4mV/°C
50MHz SPI-compatible serial interface — 4-wire mode, 1.7V to 5.5V operation, daisy-chain operation, CRC error check
Temperature range: -40°C to +125°C
Compact package: 6mm×6mm, 40-pin VQFN