F28M36P63C2ZWTT

Concerto series is a multi-core system-on-chip microcontroller unit (MCU) with independent communication and real-time control subsystems. The F28M36x series devices are the second series of Concerto products. The communication subsystem is based on the industry-standard 32-bit ARM Cortex-M3 CPU and features a variety of communication peripherals (including Ethernet 1588, USB OTG with PHY, Controller Area Network (CAN), UART, SSI, I2C) and an external interface. The real-time control subsystem is based on TI's proprietary 32-bit C28x floating-point CPU and features the most flexible and highly accurate control peripherals, including fault-protected ePWM, encoder, and capture units - all implemented by TI's TMS320C2000 Piccolo and Delfino series products. In addition, the C28-CPU has been enhanced with a new VCU instruction accelerator capable of efficient Viterbi, complex arithmetic, 16-bit Fast Fourier Transform (FFT), and Cyclic Redundancy Check (CRC) algorithms. It shares a high-speed analog subsystem and supplementary RAM memory, as well as on-chip voltage regulation and redundant timing circuits. Security considerations also include Error Correction Code (ECC), parity checking, and code secure memory, as well as documentation to assist with system-level industrial safety certification.

Applications

• Solar inverters
• EV/HEV chargers
• Power line communication

Key features

• Master Subsystem — ARM Cortex-M3
• 125MHz
• Embedded Memory
• Up to 1MB Flash (ECC)
• Up to 128KB RAM (ECC or Parity)
• Up to 64KB Shared RAM
• 2KB IPC Message RAM
• Five UARTs
• Four SSIs and one SPI
• Two I²C
• USB-OTG + PHY
• 10/100 ENET 1588 MII
• Two CAN modules (pin-bootable)
• 32-channel μDMA
• Dual security zones (128-bit password per zone)
• EPI
• μCRC module
• Four general-purpose timers
• Two watchdog timer modules
• Endianness: Little-endian
• Clocking
• On-chip crystal oscillator and external clock input
• Dynamic PLL ratio change supported
• 1.2V digital, 1.8V analog, 3.3V I/O design
• IPC
• 32 handshake channels
• Four channels generate IPC interrupts
• Usable for coordinating data transfers via IPC message RAM
• Up to 142 independently programmable, multiplexed GPIO pins
• Glitch-free pulse I/O
• Control Subsystem — TMS320C28x 32-bit CPU
• 150MHz
• C28x core hardware built-in self-test
• Embedded Memory
• Up to 512KB Flash (ECC)
• Up to 36KB RAM (ECC or Parity)
• Up to 64KB Shared RAM
• 2KB IPC Message RAM
• IEEE-754 single-precision FPU
• Viterbi, complex math, and CRC unit (VCU)
• SCI
• SPI
• I2C
• 6-channel DMA
• 12 ePWM modules
• 24 outputs (16 high-resolution)
• Six 32-bit eCAP modules
• Three 32-bit eQEP modules
• McBSP
• EPI
• One security zone (128-bit password)
• Three 32-bit timers
• Endianness: Little-endian
• Analog Subsystem
• Dual 12-bit ADC
• Up to 2.88MSPS
• Up to 24 channels
• Four S/H circuits
• Up to six comparators with 10-bit DAC
• Package
• 289-ball ZWT nFBGA
• Temperature Options:
• T: -40°C to 105°C (junction temperature)
• S: -40°C to 125°C (junction temperature)
• Q: –40ºC to 125°C (still air) (Q100 qualified for automotive applications)