XI'AN Aerosemi Tech
MT9700-N1 Active High 2A Load Switch SOT-23-5 Power Distribution Switches, Load Drivers RoHS
From
₹7.57
1,78,379 in stock
STDatasheet (PDF)
IPS1025HTR-32
1 5.6A Active High High Side Switch PowerSSO-24 Power Distribution Switches, Load Drivers RoHS
PowerSSO-24ROHS3 CompliantActive
High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads
- Manufacturer
- ST
- Manufacturer part #
- IPS1025HTR-32
- Store part #
- C5268124
- Package / case
- PowerSSO-24
- Packaging
- Tape & Reel (TR)
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement · policy
27 in stock
#C5268124
Stock & price checked 2 days ago
| Quantity | Unit price | Pack price |
|---|---|---|
| 1+ | ₹902.82 | ₹902.82 |
| 10+ | ₹773.39 | ₹7,733.90 |
| 30+ | ₹660.85 | ₹19,825.50 |
| 100+ | ₹594.73 | ₹59,473.00 |
1 × ₹902.82
₹902.82
excl. GST
₹1,065.33 incl. 18% GST
- Dispatch in 15-18 working days
- GST invoice with every order
- Standard pack: 3,000 per reel
IPS1025HTR-32
₹902.82 for 1 + GST
Specifications
- Operating Temperature
- -40℃~+125℃
- Features
- Overcurrent Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout
- number of channels
- 1
- Maximum Continuous Current
- 5.6A
- Control Input Logic
- Active High
- Operating Voltage
- 8V~60V
- RDS(on)
- 25mΩ
- Type
- High Side Switch
Packaging & compliance
- RoHS
- ROHS3 Compliant
- Lifecycle
- Active
- ECCN
- EAR99
- Packaging
- Tape & Reel (TR)
- Standard pack
- 3,000 / Reel
- Sold per
- Piece
- Minimum order
- 1
- Unit weight
- 0.38 g
Overview
The IPS1025H/HQ and IPS1025H-32/HQ-32 are single high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low R_DS-ON (less than or equal to 25 mΩ up to T_J = 125 ℃) makes the IC suitable for the applications with up to 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32) steady state operating current. The output channel is protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so the overheated output channel can only be turned back ON when the case temperature returns below the reset temperature. The embedded overload protection circuit monitors the output current and, on triggering of the activation threshold (I_PK), starts modulating the impedance of the output switch to limit the output current to I_LM, for both IC and load protection. The IC offers two different sets of activation threshold and limitation levels (IPKH, ILIMH and IPKL, ILIML) for smart driving of capacitive loads (such as bulb lamps) and loads with initial peak current requirements. The IC diagnostics is based on FLT_1 and FLT_2 pins (both current source); activated by respective overload or overtemperature events on the output channel.
Applications
- Programmable logic control
- Vending machines
- Industrial PC peripheral input/output
- Numerical control machines
- General high-side switch applications
Key features
- 8 V to 60 V operating supply voltage range
- Operating output current: 2.4 A (IPS1025H/HQ) or 5.6 A (IPS1025H-32/HQ-32)
- Smart driving of capacitive load
- Fast demagnetization of inductive loads
- Under-voltage lock-out
- VCC over-voltage protection
- Output overload and over-temperature protections
- Case over-temperature protection
- Ground disconnection protection
- Overload event diagnostic pin
- Over-temperature event diagnostic pin
- Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5
- Packages: PowerSSO-24 and VFQFPN-48L 8x6x0.9 mm
Same category
More in Power Distribution Switches, Load Drivers
Silergy
SY6280AAC1 2A Active High High Side Switch SOT-23-5 Power Distribution Switches, Load Drivers
From
₹12.33
1,26,325 in stock
TI
TPS22810DRVR1 Active High 3A Load Switch WSON-6-EP(2x2) Power Distribution Switches, Load Drivers RoHS
From
₹67.87
71,534 in stock
DIODES
AP2553W6-71 Active High 2.1A High Side Switch SOT-26 Power Distribution Switches, Load Drivers RoHS
From
₹30.63
61,080 in stock