LT1009CDR

The LT1009 reference circuit is a precision-trimmed 2.5-V shunt regulator featuring low dynamic impedance and a wide operating current range. The maximum initial tolerance is ±5 mV in the LP package and ±10 mV in the D and PW packages. The reference tolerance is achieved by on-chip trimming, which minimizes the initial voltage tolerance and the temperature coefficient, αVZ. Although the LT1009 needs no adjustments, a third terminal (ADJ) allows the reference voltage to be adjusted ±5% to eliminate system errors. In many applications, the LT1009 can be used as a terminal-for-terminal replacement for the LM136-2.5, which eliminates the external trim network. The LT1009 uses include 5-V system references, 8-bit analog-to-digital converter (ADC) and digital-to-analog converter (DAC) references, and power-supply monitors. The device also can be used in applications such as digital voltmeters and current-loop measurement and control systems. The LT1009C is characterized for operation from 0°C to 70°C. The LT1009I is characterized for operation from -40°C to 85°C.

Applications

• 5-V system references
• 8-bit analog-to-digital converter (ADC) and digital-to-analog converter (DAC) references
• power-supply monitors
• digital voltmeters
• current-loop measurement and control systems

Key features

• Excellent Temperature Stability
• Initial Tolerance: 0.2% Max
• Dynamic Impedance: 0.6 Ω Max
• Wide Operating Current Range
• Directly Interchangeable With LM136
• Needs No Adjustment for Minimum Temperature Coefficient