MIMXRT1064CVL5B

The i.MX RT1064 is a new processor family featuring NXP’s advanced implementation of the Arm Cortex -M7 core, which operates at speeds up to 528 MHz to provide high CPU performance and best real - time response. The i.MX RT1064 processor has 4 MB on chip Flash and 1 MB on - chip RAM. 512 KB SRAM can be flexibly configured as TCM or general - purpose on - chip RAM, while the other 512 KB SRAM is general - purpose on - chip RAM. The i.MX RT1064 integrates advanced power management module with DCDC and LDO that reduces complexity of external power supply and simplifies power sequencing. The i.MX RT1064 also provides various memory interfaces, including SDRAM, RAW NAND FLASH, NOR FLASH, SD/eMMC, Quad SPI, and a wide range of other interfaces for connecting peripherals, such as WLAN, Bluetooth, GPS, displays, and camera sensors. The i.MX RT1064 has rich audio and video features, including LCD display, basic 2D graphics, camera interface, SPDIF, and I2S audio. The i.MX RT1064 has analog interfaces, such as ADC, ACMP, and TSC.

Applications

• Industrial Human Machine Interfaces (HMI)
• Motor Control
• Home Appliance

Key features

• Supports single Arm Cortex - M7 Core with:
• 32 KB L1 Instruction Cache
• 32 KB L1 Data Cache
• Full featured Floating Point Unit (FPU) with support of the VFPv5 architecture
• Support the Armv7 - M Thumb instruction set
• Integrated MPU, up to 16 individual protection regions
• Tightly coupled GPIOs, operating at the same frequency as Arm core
• Up to 512 KB I - TCM and D - TCM in total
• Frequency of 600/528 MHz
• Cortex M7 CoreSight components integration for debug
• Boot ROM (128 KB)
• On - chip Flash (4 MB)
• On - chip RAM (1 MB)
• 512 KB OCRAM shared between ITCM/DTCM and OCRAM
• Dedicate 512 KB OCRAM
• External memory interfaces:
• 8/16 - bit SDRAM, up to SDRAM - 133/SDRAM - 166
• 8/16 - bit SLC NAND FLASH, with ECC handled in software
• SD/eMMC
• SPI NOR/NAND FLASH
• Parallel NOR FLASH with XIP support
• Two single/dual channel Quad SPI FLASH with XIP support
• Timers and PWMs:
• Two General Programmable Timers (GPT)
• Four Periodical Interrupt Timers (PIT)
• Four Quad Timers (QTimer)
• Four FlexPWMs
• Four Quadrature Encoder/Decoders
• Display Interface:
• Parallel RGB LCD interface
• Support 8/16/24 bit interface
• Support up to WXGA resolution
• Support Index color with 256 entry x 24 bit color LUT
• Smart LCD display with 8/16 - bit MPU/8080 interface
• Audio:
• S/PDIF input and output
• Three synchronous audio interface (SAI) modules supporting I2S, AC97, TDM, and codec/DSP interfaces
• MQS interface for medium quality audio via GPIO pads
• Generic 2D graphics engine:
• BitBlit
• Flexible image composition options—alpha, chroma key
• Porter - duff blending
• Image rotation (90°, 180°, 270°)
• Image size
• Color space conversion
• Multiple pixel format support (RGB, YUV444, YUV422, YUV420, YUV400)
• Standard 2D - DMA operation
• Camera sensors:
• Support 24 - bit, 16 - bit, and 8 - bit CSI input
• Connectivity:
• Two USB 2.0 HS OTG controllers with integrated PHY interfaces
• Two Ultra Secure Digital Host Controller (uSDHC) interfaces
• Two 10/100M Ethernet controller with support for IEEE1588
• Eight universal asynchronous receiver/transmitter (UARTs) modules
• Four I2C modules
• Four SPI modules
• Two FlexCAN modules
• FlexCAN (with Flexible Data - Rate supported)
• Three FlexIO modules
• GPIO and Pin Multiplexing:
• General - purpose input/output (GPIO) modules with interrupt capability
• Input/output multiplexing controller (IOMUXC) to provide centralized pad control
• Full PMIC integration, including on - chip DCDC and LDO
• Temperature sensor with programm