MK40DX256VLQ10

K40P81M100SF2V2 is a K40 sub-series microcontroller supporting MK40DN512VLK10.

Key features

• Operating voltage range: 1.71 to 3.6 V
• Flash programming voltage range: 1.71 to 3.6 V
• Ambient operating temperature range: -40 to 105℃
• Up to 100 MHz ARM Cortex-M4 core with DSP instructions, delivering 1.25 Dhrystone MIPS performance per MHz
• Non-FlexMemory devices with up to 512 KB program flash
• Up to 128 KB RAM
• Serial programming interface (EzPort)
• 3 to 32 MHz crystal oscillator support
• 32 kHz crystal oscillator support
• Integrated multipurpose clock generator
• Multiple low-power modes for application-optimized power consumption
• Memory protection unit with multimaster protection
• 16-channel DMA controller supporting up to 63 request sources
• External watchdog monitor
• Software watchdog
• Low-leakage wakeup unit
• Hardware CRC module for fast cyclic redundancy check
• 128-bit identification (ID) number per chip
• Segment LCD controller supporting up to 40 frontplanes and 8 backplanes, or 44 frontplanes and 4 backplanes, depending on package
• Low-power hardware touch sensing interface (TSI)
• General-purpose I/O
• Two integrated 16-bit SAR ADCs
• Per-ADC programmable gain amplifier (PGA) with up to ×64 gain
• Integrated 12-bit DAC
• Two integrated transimpedance amplifiers
• Three integrated analog comparators (CMP) with 6-bit DAC and programmable reference input
• Integrated voltage reference
• Programmable delay block
• 8-channel motor control/general-purpose/PWM timer
• Two 2-channel quadrature decoder/general-purpose timers
• Periodic interrupt timer
• 16-bit low-power timer
• Carrier modulator transmitter
• Real-time clock
• Integrated USB full-speed/low-speed OTG controller with on-chip transceiver
• Integrated Controller Area Network (CAN) module
• Two SPI modules
• Two I2C modules
• Four UART modules
• Secure Digital Host Controller (SDHC)
• I2S module