MK53DN512CMD10

K53 sub-series microcontroller products, supporting the following models: MK53DN512CLQ10, MK53DN512CMD10, MK53DX256CLQ10, MK53DX256CMD10

Key features

• Operating voltage 1.71 V to 3.6 V, Flash write voltage 1.71 V to 3.6 V, ambient operating temperature -40℃ to 85℃
• Up to 100 MHz ARM Cortex-M4 core with DSP instructions, 1.25 Dhrystone MIPS performance per MHz
• Non-FlexMemory devices up to 512 KB program Flash; FlexMemory devices up to 256 KB program Flash
• FlexMemory devices up to 256 KB FlexNVM, 4 KB FlexRAM
• Up to 128 KB RAM
• Integrated serial programming interface (EzPort), FlexBus external bus interface
• 3 MHz to 32 MHz crystal oscillator, 32 kHz crystal oscillator support, integrated multi-purpose clock generator
• Multiple low-power modes for application-optimized power consumption
• Memory protection unit with multi-master protection
• 16-channel DMA controller supporting up to 63 request sources
• Integrated external watchdog monitor, software watchdog, and low-leakage wakeup unit
• Integrated hardware CRC module for fast cyclic redundancy check
• Integrated hardware random number generator
• Integrated hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
• Unique 128-bit identification (ID) per device
• Integrated segment LCD controller supporting up to 40 frontplanes and 8 backplanes, or 44 frontplanes and 4 backplanes, depending on package
• Integrated low-power hardware touch sensing interface (TSI)
• Integrated general-purpose I/O
• Integrated two 16-bit SAR ADCs
• Per-ADC programmable gain amplifier (PGA) up to x64
• Integrated two 12-bit DACs
• Integrated two operational amplifiers, two transimpedance amplifiers
• Integrated three analog comparators (CMP) with 6-bit DAC and programmable reference input
• Integrated voltage reference
• Integrated programmable delay block
• Integrated 8-channel motor control/general-purpose/PWM timer
• Integrated two 2-channel quadrature decoder/general-purpose timers
• Integrated IEEE 1588 timer
• Integrated periodic interrupt timer, 16-bit low-power timer
• Integrated carrier modulator transmitter, real-time clock
• Integrated Ethernet controller with MII and RMII interfaces for external PHY, hardware IEEE 1588 support
• Integrated USB full-speed/low-speed OTG controller with on-chip transceiver
• Integrated three SPI modules, two I2C modules, six UART modules
• Integrated secure digital host controller (SDHC), I2S module