MK60DN256VLL10

Key features

• Operating Characteristics – Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105 ℃
• Performance – Up to 100 MHz ARM Cortex - M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
• Memories and memory interfaces – Up to 512 KB program flash memory on nonFlexMemory devices
• Up to 256 KB program flash memory on FlexMemory devices
• Up to 256 KB FlexNVM on FlexMemory devices
• 4 KB FlexRAM on FlexMemory devices
• Up to 128 KB RAM
• Serial programming interface (EzPort)
• FlexBus external bus interface
• Clocks – 3 to 32 MHz crystal oscillator
• 32 kHz crystal oscillator
• Multi - purpose clock generator
• System peripherals – Multiple low - power modes to provide power optimization based on application requirements
• Memory protection unit with multi - master protection
• 16 - channel DMA controller, supporting up to 63 request sources
• External watchdog monitor
• Software watchdog
• Low - leakage wakeup unit
• Security and integrity modules – Hardware CRC module to support fast cyclic redundancy checks
• Hardware random - number generator
• Hardware encryption supporting DES, 3DES, AES, MD5, SHA - 1, and SHA - 256 algorithms
• 128 - bit unique identification (ID) number per chip
• Human - machine interface – Low - power hardware touch sensor interface (TSI)
• General - purpose input/output
• Analog modules – Two 16 - bit SAR ADCs
• Programmable gain amplifier (PGA) (up to x64) integrated into each ADC
• Two 12 - bit DACs
• Two transimpedance amplifiers
• Three analog comparators (CMP) containing a 6 - bit DAC and programmable reference input
• Voltage reference
• Timers – Programmable delay block
• Eight - channel motor control/general purpose/PWM timer
• Two 2 - channel quadrature decoder/general purpose timers
• IEEE 1588 timers
• Periodic interrupt timers
• 16 - bit low - power timer
• Carrier modulator transmitter
• Real - time clock
• Communication interfaces Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability
• USB full -/low - speed On - the - Go controller with on - chip transceiver
• Two Controller Area Network (CAN) modules
• Three SPI modules
• Two I2C modules
• Six UART modules
• Secure Digital host controller (SDHC)
• I2S module