PIC18F1230-I/SO

Key features

• Ultra Low 50 nA Input Leakage
• Run mode currents down to 15 μA, typical
• Idle mode currents down to 3.7 μA, typical
• Sleep mode current down to 100 nA, typical
• Timer1 Oscillator: 1.8 μA, typical; 32 kHz; 2V
• Watchdog Timer (WDT): 1.4 μA, typical; 2V
• Two-Speed Oscillator Start-up
• Up to 6 PWM Channel Outputs - Complementary or independent outputs
• Edge or Center-Aligned Operation
• Flexible Dead-Band Generator
• Hardware Fault Protection Input
• Simultaneous Update of Duty Cycle and Period: - Flexible Special Event Trigger output
• Four Crystal modes, up to 40 MHz
• 4x Phase Lock Loop (PLL) – Available for Crystal and Internal Oscillators
• Two External RC modes, up to 4 MHz
• Fast wake-up from Sleep and Idle, 1 μs, typical
• Two External Clock modes, up to 40 MHz
• Internal Oscillator Block: - 8 user-selectable frequencies from 31 kHz to 8 MHz - Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL - User-tunable to compensate for frequency drift
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops
• High-Current Sink/Source 25 mA/25 mA
• Up to 4 Programmable External Interrupts
• Four Input Change Interrupts