PIC18F65J90-I/PT

Key features

• Power-Managed modes: Run, Idle, Sleep
• Run current down to 7 μA, typical
• Idle current down to 2.5 μA, typical
• Sleep current down to 100 nA, typical
• Fast INTOSC start-up from Sleep, 1 μs typical
• Two-Speed Oscillator Start-up reduces crystal stabilization wait time
• Direct LCD Panel Drive Capability: Can drive LCD panel while in Sleep mode
• Up to 48 Segments and 192 Pixels; Software Selectable
• Programmable LCD Timing module: Multiple LCD timing sources available; Up to 4 commons: static, 1/2, 1/3 or 1/4 multiplex; Static, 1/2 or 1/3 Bias configuration
• Integrated Charge Pump Module with Voltage Boost
• 1000 Erase/Write Cycle Flash Program Memory, Typical
• Flash Retention: 20 Years Minimum
• Self-Programmable under Software Control
• Priority Levels for Interrupts
• 8×8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT): Programmable period from 4 ms to 131s
• In-Circuit Serial Programming (ICSP) via Two Pins
• In-Circuit Debug with 3 Breakpoints via Two Pins
• Operating Voltage Range: 2.0V to 3.6V
• On-Chip 2.5V Regulator
• Two Crystal modes, 4 - 25 MHz
• Two External Clock modes, up to 40 MHz
• Internal Oscillator Block: 8 user-selectable frequencies from 31.25 kHz to 8 MHz
• Secondary Oscillator using Timer1 ×32 kHz
• Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock fails