PIC32CM1216MC00032-E/PT

Key features

• Operating voltage: 2.7V - 5.5V
• Operating temperature range: -40°C to +85°C, -40°C to +125°C
• Clock frequency: DC to 48 MHz
• AEC-Q100 Grade 1 compliant (-40°C to 125°C)
• Core: Arm® Cortex®-M0+ CPU, up to 48 MHz operating frequency
• Single-cycle hardware multiplier
• Memory Protection Unit (MPU)
• Up to 128 KB in-system self-programmable Flash
• Up to 4 KB independent self-programmable data Flash
• Up to 16 KB SRAM main memory
• Power-on Reset (POR) and Brown-out Detection (BOD)
• Internal and external clock options, 48 MHz to 96 MHz Fractional Digital Phase-Locked Loop (FDPLL96M)
• External Interrupt Controller (EIC)
• One Non-Maskable Interrupt
• Idle and standby sleep modes
• SleepWalking peripherals
• Up to 38 programmable I/O pins
• Up to 16 external interrupts
• Up to two Parallel Input/Output Controllers (PIO)
• In-circuit and in-application programming
• 2-wire Serial Wire Debug port interface
• Four hardware breakpoints, two data watchpoints
• Instruction trace Micro Trace Buffer (MTB) in SRAM
• Two 24-bit Timer/Counters and one 16-bit control Timer/Counter (TCC) with extended functions
• Up to four compare channels with optional complementary outputs
• Synchronous PWM mode generation across port pins
• Deterministic fault protection, configurable dead-time between fast decay and complementary outputs
• Dithering function, up to 5-bit additional resolution with reduced quantization error
• Up to 8 waveform output channels
• Two 12-bit, 1 Msps ADCs
• Differential and single-ended inputs
• Automatic offset and gain error compensation
• Hardware oversampling and decimation, supporting 13-bit, 14-bit, 15-bit, or 16-bit resolution
• One 16-bit Sigma-Delta ADC (SDADC)
• 2 differential channels
• One 10-bit, 350 ksps DAC
• Two Analog Comparators (AC) with window compare function
• Hardware divide and square root accelerator (DIVAS)
• 12-channel Direct Memory Access Controller (DMAC)
• 12-channel event system
• Up to five 16-bit Timer/Counters (TC)
• One 16-bit TC with compare/capture channels
• One 8-bit TC with compare/capture channels
• One 32-bit TC with compare/capture channels using two TCs
• Frequency meter
• 32-bit Real-Time Counter (RTC) with clock/calendar function
• Watchdog Timer (WDT)
• CRC-32 generator
• Up to four Serial Communication Interfaces (SERCOM), each configurable as:
• USART in full-duplex and single-wire half-duplex configurations
• I²C up to 3.4 MHz
• SPI
• LIN host/client
• RS-485
• Configurable Custom Logic (CCL)
• Integrated temperature sensor