PIC32MX470F512L-120/PF

MIPS32 M4K 32 Bit 120MHz TQFP-100(14x14) Microcontrollers RoHS

TQFP-100(14x14)ROHS3 CompliantActive

Manufacturer: MICROCHIP
Manufacturer part #: PIC32MX470F512L-120/PF
Store part #: C638446
Package / case: TQFP-100(14x14)
Category: Microcontrollers
Packaging: Tray

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

10 in stock

#C638446

Stock & price checked 39 h ago

Quantity	Unit price	Pack price
1+	₹1,954.15	₹1,954.15
10+	₹1,860.61	₹18,606.10
30+	₹1,698.82	₹50,964.60
100+	₹1,557.67	₹1,55,767.00

Quantity (min 1)

1 × ₹1,954.15

₹1,954.15

excl. GST

₹2,305.90 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 90 per tray

PIC32MX470F512L-120/PF

₹1,954.15 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

ADC (Bit): 10bit
Number of I/O: 81
Operating Temperature: 0℃~+70℃
Voltage - Supply: 2.3V~3.6V
Program Memory Type: FLASH
Program Storage Size: 512KB
CPU Core: MIPS32 M4K
Core Size: 32 Bit
CPU Maximum Speed: 120MHz
Oscillator Type: Built-in

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: 3A991A2
Packaging: Tray
Standard pack: 90 / Tray
Sold per: Piece
Minimum order: 1
Unit weight: 2.008 g

Overview

Key features

MIPS16e mode for up to 40% smaller code size
Code-efficient (C and Assembly) architecture
Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply
0.9% internal oscillator
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer
Fast wake-up and start-up
Low-power management modes (Sleep and Idle)
Integrated Power-on Reset, Brown-out Reset, and High Voltage Detect
0.5 mA/MHz dynamic current (typical), 50 μA IPD current (typical)
External graphics interface with up to 34 PMP pins
Audio data communication: I²S, LJ, RJ, USB
Audio data control interface: SPI and I²C
Audio data master clock: Generation of fractional clock frequencies, Can be synchronized with USB clock, Can be tuned in run-time
Charge Time Measurement Unit (CTMU): Supports mTouch capacitive touch sensing, Provides high-resolution time measurement (1 ns)
10-bit 1 Msps rate with one Sample and Hold (S&H)
Up to 28 analog inputs
Can operate during Sleep mode
Flexible and independent ADC trigger sources
On-chip temperature measurement capability
Two dual-input Comparator modules
Programmable references with 32 voltage points
Five General Purpose Timers: Five 16-bit and up to two 32-bit Timers/Counters
Five Output Compare (OC) modules
Five Input Capture (IC) modules
Peripheral Pin Select (PPS) to allow function remap
Real-Time Clock and Calendar (RTCC) module
USB 2.0-compliant Full-speed OTG controller
Up to five UART modules (20 Mbps): LIN 2.1 protocols and IrDA support
Two 4-wire SPI modules (25 Mbps)
Two I²C modules (up to 1 Mbaud) with SMBus support
PPS to allow function remap
Parallel Master Port (PMP)
Four channels of hardware DMA with automatic data size detection
32-bit Programmable Cyclic Redundancy Check (CRC)
Two additional channels dedicated to USB
15 mA or 12 mA source/sink for standard VoH/VoL and up to 22 mA for non-standard VoH1
5V-tolerant pins
Selectable open drain, pull-ups, and pull-downs
External interrupts on all I/O pins
Class B Safety Library, IEC 60730
In-circuit and in-application programming
4-wire MIPS Enhanced JTAG interface
Unlimited program and six complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan