R7FA4M3AD3CFB#AA0

The MCU integrates multiple series of software- and pin-compatible Arm-based 32-bit cores that share a common set of Renesas peripherals to facilitate design scalability and efficient platform-based product development. The MCU in this series incorporates a high-performance Arm Cortex-M33 core running up to 100 MHz with the following features: Up to 1 MB code flash memory ● 128 KB SRAM ● Quad Serial Peripheral Interface (QSPI) ● USBFS, SD/MMC Host Interface ● Capacitive Touch Sensing Unit (CTSU) ● Analog peripherals Security and safety features

Key features

• Arm Cortex-M33 Core
• Armv8-M architecture with the main extension
• Maximum operating frequency: 100 MHz
• Arm Memory Protection Unit (Arm MPU) – Protected Memory System Architecture (PMSAv8) – Secure MPU (MPU_S): 8 regions – Non-secure MPU (MPU_NS): 8 regions
• SysTick timer – Embeds two Systick timers: Secure and Non-secure instance – Driven by LOCO or system clock
• CoreSight ETM-M33
• Memory
• Up to 1-MB code flash memory
• 8-KB data flash memory (100,000 program/erase (P/E) cycles)
• 128-KB SRAM
• Connectivity
• Serial Communications Interface (SCI)×6 – Asynchronous interfaces – 8-bit clock synchronous interface – Smart card interface – Simple IIC – Simple SPI – Manchester coding (SCI3, SCI4)
• I²C bus interface (IIC)×2
• Serial Peripheral Interface (SPI)
• Quad Serial Peripheral Interface (QSPI)
• USB 2.0 Full-Speed Module (USBFS)
• Control Area Network module (CAN)×2
• SD/MMC Host Interface (SDHI)
• Serial Sound Interface Enhanced (SSIE)
• Analog
• 12-bit A/D Converter (ADC12)×2 – 5 Msps at interleaving
• 12-bit D/A Converter (DAC12)×2
• Temperature Sensor (TSN)
• Timers
• General PWM Timer 32-bit (GPT32)×4
• General PWM Timer 16-bit (GPTl6)×4
• Low Power Asynchronous General Purpose Timer (AGT)×6
• Security and Encryption
• Secure Crypto Engine 9 – Symmetric algorithms: AES – Asymmetric algorithms: RSA, ECC, and DSA – Hash-value generation: SHA224, SHA256, GHASH – 128-bit unique ID
• System and Power Management
• Low power modes
• Battery backup function (VBATT)
• Realtime Clock (RTC) with calendar and VBATT support
• Event Link Controller (ELC)
• Data Transfer Controller (DTC)
• DMA Controller (DMAC)×8
• Power-on reset
• Low Voltage Detection (LVD) with voltage settings
• Watchdog Timer (WDT)
• Independent Watchdog Timer (IWDT)
• Human Machine Interface (HMI)
• Capacitive Touch Sensing Unit (CTSU)
• Multiple Clock Sources
• Main clock oscillator (MOSC) (8 to 24 MHz)
• Sub-clock oscillator (SOSC) (32.768 kHz)
• High-speed on-chip oscillator (HOCO) (16/18/20 MHz)
• Middle-speed on-chip oscillator (MOCO) (8 MHz)
• Low-speed on-chip oscillator (LOCO) (32.768 kHz)
• IWDT-dedicated on-chip oscillator 15 kHz
• Clock trim function for HOCO/MOCO/LOCO
• PLL/PLL2
• Clock out support
• General-Purpose I/O Ports
• 5-V tolerance, open drain, input pull-up, switchable driving ability
• Operating Voltage
• VCC: 2.7 to 3.6 V
• Operating Temperature and Packages
• Ta = -40℃ to +105℃
• 144-pin LQFP (20 mm×20 mm, 0.5 mm pitch)
• 100-pin LQFP (14 mm×14 mm, 0.5 mm pitch)
• 64-pin LQFP (10 mm×10 mm, 0.5 mm pitch)
• 144-pin BGA (7 mm×7 mm, 0.50 mm pitch)
• 64-pin BGA (6 mm×6 mm, 0.65 mm pitch)