STM8S001J3M3TR

16 MHz STM8S 8-bit MCU with 8 Kbyte Flash memory, 128-byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I2C interfaces.

Key features

• 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline Extended instruction set
• Program memory: 8-Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles
• RAM: 1 Kbyte
• Data memory: 128-byte true data EEPROM; endurance up to 100 k write/erase cycles
• 2.95 V to 5.5 V operating voltage
• Flexible clock control, 3 master clock sources
• External clock input
• Internal, user-trimmable 16 MHz RC
• Internal low-power 128 kHz RC
• Clock security system with clock monitor
• Power management
• Low-power modes (wait, active-halt, halt)
• Switch-off peripheral clocks individually
• Permanently active, low-consumption power-on and power-down reset
• Nested interrupt controller with 32 interrupts
• Up to 5 external interrupts
• Advanced control timer: 16-bit, 2 CAPCOM channels, 2 outputs, dead-time insertion and flexible synchronization
• 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)
• 8-bit basic timer with 8-bit prescaler
• Auto wakeup timer
• Window and independent watchdog timers
• UART, SmartCard, IrDA, LIN master mode
• SPI unidirectional interface up to 8 Mbit/s (master simplex mode, slave receiver only)
• I2C interface up to 400 Kbit/s
• 10-bit ADC, ± 1 LSB ADC with up to 3 multiplexed channels, scan mode and analog watchdog
• Internal reference voltage measurement
• Up to 5 I/Os including 4 high-sink outputs
• Highly robust I/O design, immune against current injection
• Embedded single-wire interface module (SWIM) or fast on-chip programming and nonintrusive debugging