TMS320F28015NMFA

The TMS320F2809, TMS320F2809-Q1, TMS320F2808, TMS320F2808-Q1 TMS320F2806, TMS320F2802, TMS320F2801-Q1, TMS320F28015-Q1, TMS320F28016-Q1, TMS320C2802-Q1, and TMS320C2801 devices, members of the TMS320C28x DSP generation, are highly integrated, high-performance solutions for demanding control applications.

Applications

• Digital power
• Motor drive and control

Key features

• High-performance static CMOS technology
• 100 MHz (10-ns cycle time)
• 60 MHz (16.67-ns cycle time)
• Low-power (1.8-V core, 3.3-V I/O) design
• JTAG boundary scan support
• IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
• High-performance 32-bit CPU (TMS320C28x)
• 16×16 and 32×32 MAC operations
• 16×16 dual MAC
• Harvard bus architecture
• Atomic operations
• Fast interrupt response and processing
• Unified memory programming model
• Code-efficient (in C/C++ and Assembly)
• On-chip memory
• F2809: 128K×16 flash, 18K×16 SARAM
• F2808: 64K×16 flash, 18K×16 SARAM
• F2806: 32K×16 flash, 10K×16 SARAM
• F2802: 32K×16 flash, 6K×16 SARAM
• F2801: 16K × 16 flash, 6K×16 SARAM
• F2801x: 16K×16 flash, 6K×16 SARAM
• 1K × 16 OTP ROM (flash devices only)
• C2802: 32K×16 ROM, 6K×16 SARAM
• C2801: 16K × 16 ROM, 6K×16 SARAM
• Boot ROM (4K×16)
• With software boot modes (via SCI, SPI, CAN, I2C, and parallel I/O)
• Standard math tables
• Clock and system control
• On-chip oscillator
• Watchdog timer module
• Any GPIO A pin can be connected to one of the three external core interrupts
• Peripheral Interrupt Expansion (PIE) block that supports all 43 peripheral interrupts
• Endianness: Little endian
• 128-bit security key/lock
• Protects flash/OTP/L0/L1 blocks
• Prevents firmware reverse-engineering
• Three 32-bit CPU timers
• Enhanced control peripherals
• Up to 16 PWM outputs
• Up to 6 HRPWM outputs with 150-ps MEP resolution
• Up to four capture inputs
• Up to two quadrature encoder interfaces
• Up to six 32-bit/six 16-bit timers
• Serial port peripherals
• Up to 4 SPI modules
• Up to 2 SCI (UART) modules
• Up to 2 CAN modules
• One Inter-Integrated-Circuit (I2C) bus
• 12-bit ADC, 16 channels
• 2×8 channel input multiplexer
• Two sample-and-hold
• Single/simultaneous conversions
• Fast conversion rate:
• 80 ns - 12.5 MSPS (F2809 only)
• 160 ns - 6.25 MSPS (280x)
• 267 ns - 3.75 MSPS (F2801x)
• Internal or external reference
• Up to 35 individually programmable, multiplexed GPIO pins with input filtering
• Advanced emulation features
• Analysis and breakpoint functions
• Real-time debug via hardware
• Development support includes
• ANSI C/C++ compiler/assembler/linker
• Code Composer Studio IDE
• SYS/BIOS
• Digital motor control and digital power software libraries
• Low-power modes and power savings
• IDLE, STANDBY, HALT modes supported
• Disable individual peripheral clocks
• Package options
• Thin quad flatpack (PZ)
• MicroStar BGA (GGM, ZGM)
• Temperature options
• A: -40℃ to 85℃ (PZ, GGM, ZGM)
• S: -40℃ to 125℃ (PZ, GGM, ZGM)
• Q: -40℃ to 125℃ (PZ) (AEC-Q100 qualification for automotive applications)