TPS65988DHRSHR

TPS65988 is a highly integrated and autonomous dual-port USB Type-C and Power Delivery (PD) controller that provides cable plug/unplug and orientation detection for a single USB Type-C connector. During cable detection, the TPS65988 communicates over the CC lines using the USB PD protocol. After cable detection and USB PD negotiation are complete, the TPS65988 enables the appropriate power path and configures alternate mode settings for an external multiplexer. The TPS65988 integrates a fully managed power path with robust protection features, delivering a complete USB-C PD solution. The TPS65988 also enables the appropriate power path and configures alternate mode settings for an external multiplexer.

Applications

• Single-board computers
• Power tools
• Power banks
• Retail automation and payment
• Wireless speakers
• Headphones
• Other personal electronics and industrial applications
• Hub stations
• Flat panel monitors

Key features

• USB-IF PD3.0 certified
• TPS65988: fully configurable dual-port USB PD controller
• Source and sink port capability up to 20V/5A
• Alternate mode support
• Fully managed integrated power path: dual integrated 5V to 20V, 5A, 25mΩ bidirectional switches
• UL2367 certification number: 20190107 - E169910
• IEC62368-1 certification number: US - 34617 - UL
• Integrated robust power path protection: 20V/5A power path configured as sink port integrates reverse current protection, undervoltage protection, overvoltage protection, and slew rate control; 20V/5A power path configured as source port integrates undervoltage protection, overvoltage protection, and current limiting for inrush current protection
• 13 configurable GPIOs
• BC1.2 charging support
• USB PD 3.0 compliant
• USB Type-C specification compliant
• Cable attach and orientation detection
• Integrated VCONN switch
• PHY and policy engine
• 3.3V LDO output for dead battery support
• Powered via 3.3V or VBUS supply
• 1 I2C master or slave port
• 1 I2C master port only
• 1 I2C slave port only