TYPE-C-FGB423

1. Leave 10PCS empty at both the beginning and end of each reel; seal the tail end with masking tape. 2. After filling the reel with products, wind one additional round of protective tape, seal it with masking tape, and affix 1PCS material label. 3. Stack every 10 reels into one pile (totaling 2500PCS) and pack into 1 outer carton. 4. Handle with care during transportation. 5. Do not stack too high during transit (maximum 1.8M); do not apply heavy pressure. 6. Drop test conditions: finished goods carton free-falls from a height of 1.2 meters. a. Products must not escape from the carrier tape pockets. b. Products must show no damage or deformation from the drop. c. Inner packaging materials must not be severely damaged.

Key features

• Materials & Surface Treatment: See list.
• Plating Specifications:
• Contacts: Nickel underplating min. 50 μin, nickel plating on contact area, gold plating on soldering area.
• Shell: Nickel underplating min. 30 μin, full coverage.
• Center plate: Cleaning treatment only.
• Mechanical Performance:
• Insertion Force: 0.5~2.0 kgf.
• Withdrawal Force: 0.8~2.0 kg, 0.6~2.0 kgf after durability test.
• Durability: 10000 cycles.
• Electrical Performance:
• Rated Current: 5A max.
• Rated Voltage: 20V max.
• Withstanding Voltage: 100VAC.
• Contact Resistance: 40mΩ max.
• Insulation Resistance: 10MΩ min.
• Environmental Performance:
• Operating Temperature: -40°C~+85°C.
• Soldering Temperature: 265±5°C, 5±0.5s.
• Salt Spray Test: 48 hours min.