VND7012AYTR

2 Active High 75A High Side Switch PowerSSO-36 Power Distribution Switches, Load Drivers RoHS

PowerSSO-36ROHS3 CompliantActive

Double channel high-side driver with MultiSense analog feedback for automotive applications

Manufacturer: ST
Manufacturer part #: VND7012AYTR
Store part #: C2150146
Package / case: PowerSSO-36
Category: Power Distribution Switches, Load Drivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

148 in stock

#C2150146

Stock & price checked 2 days ago

Quantity	Unit price	Pack price
1+	₹334.40	₹334.40
10+	₹307.70	₹3,077.00
30+	₹291.13	₹8,733.90
100+	₹273.90	₹27,390.00
500+	₹266.36	₹1,33,180.00
1,000+	₹262.92	₹2,62,920.00

Quantity (min 1)

1 × ₹334.40

₹334.40

excl. GST

₹394.59 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 1,000 per reel

VND7012AYTR

₹334.40 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Operating Temperature: -40℃~+150℃
Features: Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection;Latch protection
number of channels: 2
Control Input Logic: Active High
Maximum Continuous Current: 75A
Operating Voltage: 4V~28V
RDS(on): 12mΩ
Type: High Side Switch

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 1,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 0.983 g

Overview

The device is a double channel high-side driver manufactured using ST proprietary VIPower M0-7 technology and housed in PowerSSO-36 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics. The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off. A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality. A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCC and OFF-state open-load. A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.

Applications

All types of Automotive resistive, inductive and capacitive loads
Specially intended for Automotive Turn Indicators (up to 3 x P27W or SAE1156 and 2 x R5W paralleled or Automotive Headlamps)

Key features

AEC-Q100 qualified
General Double channel smart high side driver with MultiSense analog feedback
Very low standby current
Compatible with 3V and 5 V CMOS outputs
MultiSense diagnostic functions
Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
Overload and short to ground (power limitation) indication
Thermal shutdown indication
Off-state open-load detection
Output short to VCC detection
Sense enable/ disable
Protections
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self limiting of fast thermal transients
Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
Loss of ground and loss of VCC
Reverse battery through self turn-on
Electrostatic discharge protection