VNQ6004SATR-E

4 Active High High Side Switch PowerSSO-36 Power Distribution Switches, Load Drivers RoHS

PowerSSO-36ROHS3 CompliantActive

Quad-channel high-side driver with 16-bit SPI interface

Manufacturer: ST
Manufacturer part #: VNQ6004SATR-E
Store part #: C2149992
Package / case: PowerSSO-36
Category: Power Distribution Switches, Load Drivers
Packaging: Tape & Reel (TR)

Datasheet (PDF)

Every Order Guarantee

100% Authentic · 30-Day Return or Replacement · policy

26 in stock

#C2149992

Stock & price checked 2 days ago

Quantity	Unit price	Pack price
1+	₹1,006.34	₹1,006.34
10+	₹982.84	₹9,828.40
30+	₹967.26	₹29,017.80
100+	₹951.67	₹95,167.00

Quantity (min 1)

1 × ₹1,006.34

₹1,006.34

excl. GST

₹1,187.48 incl. 18% GST

Need volume or a scheduled delivery? Request a quote

Dispatch in 15-18 working days
GST invoice with every order
Standard pack: 1,000 per reel

VNQ6004SATR-E

₹1,006.34 for 1 + GST

Need this with the rest of your board? Upload the BOM — we price every line.Upload BOM

Specifications

Operating Temperature: -40℃~+150℃
Features: Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection;Load dump protection;Latch protection
number of channels: 4
Control Input Logic: Active High
Maximum Continuous Current: 25A;55A
Operating Voltage: 5V~28V
RDS(on): 10mΩ;30mΩ
Type: High Side Switch

Packaging & compliance

RoHS: ROHS3 Compliant
Lifecycle: Active
ECCN: EAR99
Packaging: Tape & Reel (TR)
Standard pack: 1,000 / Reel
Sold per: Piece
Minimum order: 1
Unit weight: 1.192 g

Overview

The VNQ6004SA-E is a device made using viPower technology. It is intended for driving resistive or inductive loads directly connected to ground. The device is protected against voltage transient on VCC pin. Programming, control and diagnostics are implemented via the SPI bus. An analog current feedback for each channel is connected to the CURRENT-SENSE pin via a multiplexer. A CS_SYNC pin delivers a synchronous signal for sampling the current sense while the corresponding output is on. The device detects open-load for both on and OFF-state conditions. Real time diagnostic is available through the SPI bus (open-load, output short to VCC, over temperature, communication error, power limitation). Output current limitation protects the device in an over load condition. The device can limit the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown can be configured as latched off or with automatic restart. The device enters a limp home mode in case of loss of digital supply (VDD), reset of digital memory or CSN monitoring time-out event. In this mode states of channel 0,1,2 or 3 are respectively controlled by four dedicated pins IN0, IN1, IN2 and IN3. Channel 0,1 can be programmed in BULB/LED mode.

Key features

16-bit ST-SPI for full and diagnostic
Programmable Bulb/LED mode for ch. 0-1
Integrated PWM and phase shift generation unit
160 Hz internal PWM fallback frequency
Advanced limp home functionalities for robust fail-safe system
Very low standby current
Optimized electromagnetic emissions
Very low electromagnetic susceptibility
In compliance with the 2002/95/EC
Multiplex proportional load current sense
Synchronous diagnostic of over load and short to GND, output shorted to VCC
ON-state and OFF-state open-load
Programmable case over temperature warning
Load current limitation
Self limiting of fast thermal transients
Power limitation and over temperature shutdown (latching-off or auto restart)
Undervoltage shutdown
Overvoltage clamp
Reverse battery protected through power outputs self turn-on (no external components)
Load dump protected
Protection against loss of ground