MKE06Z64VLD4

Key features

• Operating Range:
• Voltage range: 2.7 to 5.5 V; Flash programming voltage range: 2.7 to 5.5 V
• Temperature range (ambient): -40 to 105℃
• Performance:
• ARM Cortex-M0+ core up to 48 MHz
• Single-cycle 32-bit × 32-bit multiplier
• Single-cycle I/O access port
• Memory and Memory Interface:
• Flash up to 128 KB
• RAM up to 16 KB
• Clocking:
• Oscillator (OSC) — supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; selectable low-power or high-gain oscillator
• Internal Clock Source (ICS) — internal FLL with integrated internal or external reference clock source; 37.5 kHz pre-calibrated internal reference clock source, usable for 48 MHz system clock
• Internal 1 kHz low-power oscillator (LPO)
• System Peripherals:
• Power Management Controller (PMC) with three power modes: run, standby, and stop
• Low-Voltage Detection (LVD) with reset, interrupt, and selectable trip point
• Watchdog (WDOG) with independent clock source
• Configurable Cyclic Redundancy Check (CRC) module
• Serial Wire Debug (SWD) interface
• SRAM bit-manipulation mapping region (BIT-BAND)
• Bit Manipulation Engine (BME)
• Security and Integrity Modules:
• 80-bit unique identification (ID) number per device
• Human-Machine Interface:
• Up to 71 general-purpose I/O (GPIO)
• Two 32-bit Keyboard Interrupt (KBI) modules
• External Interrupt (IRQ) module
• Analog Modules:
• One 16-channel, 12-bit SAR ADC, operable in stop mode, with selectable hardware trigger source (ADC)
• Two analog comparators (ACMP) with 6-bit DAC and configurable reference input
• Timers:
• One 6-channel FlexTimer/PWM (FTM)
• Two 2-channel FlexTimer/PWM (FTM)
• One 2-channel Periodic Interrupt Timer (PIT)
• One Pulse Width Counter (PWT)
• One Real-Time Clock (RTC)
• Communication Interfaces:
• Two SPI modules (SPI)
• Three UART modules (UART)
• Two I²C modules (I²C)
• One MSCAN module (MSCAN)
• Package Options:
• 80-pin LQFP
• 64-pin QFP/LQFP
• 44-pin LQFP