MKE14Z64VLD4

The Kinetis KE1xZ256 MCU is the main device in the KE1xZ series based on the ARM Cortex M0+ core. The KE1xZ offers up to 256 KB of Flash, up to 32 KB of RAM, and a comprehensive set of analog/digital functions, elevating the Kinetis E series to higher performance and broader scalability. The robust TSI provides a high level of stability and accuracy for customers' HMI systems. The 1 Msps ADC and FlexTimer help build excellent solutions for BLDC motor control systems.

Key features

• ARM Cortex-M0+ core, up to 72 MHz
• ARM core based on ARMv6 architecture and Thumb-2 ISA
• Configurable Nested Vectored Interrupt Controller (NVIC)
• Memory-Mapped Divide and Square Root (MMDVSQ) module
• 8-channel DMA controller expandable to 63 channels via DMAMUX
• Flash Access Control (FAC)
• Cyclic Redundancy Check (CRC) generator module
• 128-bit unique identification (ID) number
• Internal watchdog (WDOG) with independent clock source
• External Watchdog Monitor (EWM) module
• ADC self-calibration
• On-chip clock loss monitoring
• Up to 32 interrupt request (IRQ) sources
• Up to 89 GPIO pins with interrupt capability
• Touch Sensing Input (TSI) module
• Up to 256 KB program Flash
• Up to 32 KB SRAM
• 32 KB FlexNVM for data Flash with EEPROM emulation
• 2 KB FlexRAM for EEPROM emulation
• 128-byte Flash cache
• Boot ROM with built-in bootloader
• Two 12-bit ADCs, up to 16 analog input channels per module, up to 1 Msps
• Two high-speed analog comparators (CMP) with internal 8-bit DAC; CMP0's 8-bit DAC supports buffered output-to-pin option
• Three Flex Timers (FTM) for PWM generation, providing up to 8 standard channels
• One 16-bit Low-Power Timer (LPTMR) with flexible wake-up control
• One Programmable Delay Block (PDB) with flexible trigger system
• One 32-bit Low-Power Interrupt Timer (LPIT) with 4 channels
• Real-Time Clock (RTC)
• 4–40 MHz fast external oscillator (OSC)
• 32 kHz slow external oscillator (OSC32)
• 48–60 MHz high-accuracy (up to ±1%) Fast Internal Reference Clock (FIRC) for normal operation
• 8 MHz / 2 MHz high-accuracy (up to ±3%) Slow Internal Reference Clock (SIRC) for low-speed operation
• 128 kHz Low-Power Oscillator (LPO)
• Low-Power FLL (LPFLL)
• DC external square-wave input clock up to 60 MHz
• System Clock Generator (SCG)
• Real-Time Counter (RTC)
• Low-power ARM Cortex-M0+ core with excellent energy efficiency
• Power Management Controller (PMC) with multiple power modes: Run, Wait, Stop, VLPR, VLPW, and VLPS
• Clock gating for unused modules; selected peripherals remain operational in low-power modes
• POR, LVD/LVR
• Three LPUART modules with DMA support and low-power availability
• Two LPSPI modules with DMA support and low-power availability
• Two LPI2C modules with DMA support and low-power availability
• FlexIO module for flexible, high-performance serial interfaces
• Serial Wire Debug (SWD) interface
• Debug Watchpoint and Trace (DWT)
• Micro Trace Buffer (MTB)
• Voltage range: 2.7 to 5.5 V
• Ambient temperature range: -40 to 105°C