STM32F756IGT6

ARM®-based Cortex®-M7 32-bit MCU+FPU, 462 DMIPS, up to 1MB Flash/320+16+4KB RAM, with cryptographic features, USB OTG HS/FS, Ethernet, 18 timers, 3 ADCs, 25 communication interfaces, camera and LCD interfaces.

Key features

• Core: ARM 32-bit Cortex-M7 CPU with FPU, adaptive real-time accelerator (ART AcceleratorTM) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flashmemory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
• Memories: Up to 1MB of Flash memory, 1024 bytes of OTP memory, SRAM: 320KB (including 64KB of data TCM RAM for critical real-time data) + 16KB of instruction TCM RAM (for critical real-time routines) + 4KB of backup SRAM (available in the lowest power modes), Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDRSDRAM, NOR/NAND memories
• Dual mode Quad-SPI
• LCD parallel interface, 8080/6800 modes
• LCD-TFT controller up to XGA resolution with dedicated Chrom-ART AcceleratorTM for enhanced graphic content creation (DMA2D)
• Clock, reset and supply management: 1.7V to 3.6V application supply and I/Os, POR, PDR, PVD and BOR, Dedicated USB power, 4-to-26 MHz crystal oscillator, Internal 16 MHz factory-trimmed RC (1% accuracy), 32 kHz oscillator for RTC with calibration, Internal 32 kHz RC with calibration
• Low-power: Sleep, Stop and Standby modes, VBAT supply for RTC, 32x32 bit backup registers ± 4KB backup SRAM
• 3x12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interieaved mode, 2x12-bit D/A converters
• Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
• Debug mode: SWD & JTAG interfaces, Cortex-M7 Trace MacrocelITM
• Up to 168 I/O ports with interrupt capability, Up to 164 fast I/Os up to 108 MHz, Up to 166 5 V-tolerant I/Os
• Up to 25 communication interfaces: Up to 4xI²C interfaces (SMBus/PMBus), Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control), Up to 6 SPls (up to 50 Mbit/s), 3 with muxed simplex for audio class accuracy via internal audio PLL or external clock, 2 x SAls (serial audio interface), 2xCANs (2.0B active) and SDMMC interface, SPDIFRX interface, HDMI-CEC
• Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY, USB 2.0 high-speed/full-speed device/host/oTGcontrollerwithdedicated DMA, on-chip full-speed PHY and ULPI, 10/100EthernetMACwithdedicatedDMA: supports IEEE 1588v2 hardware, MII/RMII, 8- to 14-bit parallel camera interface up to 54 Mbyte/s
• Cryptographic acceleration: hardware acceleration for AES128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC
• True random number generator
• CRC calculation unit
• RTC: subsecond accuracy, hardware calendar
• 96-bit unique ID